Skip Navigation LinksHome : Lincoln : Lincoln Lubrications : Large Lubrication : Two Line
Helios Two-line Systems

Applications

Suitable for NLGI class 2 grease, for long distances and for pressures up to 400 bar (oil applications also possible).

Machines and systems encompassing a large number of lubrication points. For example in:
- Steel Industry
- Cement Industry
- Paper Industry
- Beverage Industry
- Mining and Earth Moving Equipment

System Features

High pressure system up to 400 bar, for lubrication points with variances in lubricant quantity requirements. Individual monitoring - standard with visual - or optional electrical monitoring.


ZPU 01/02 Pump

Applications

As a supply pump for two-line systems 0 often in conjunction with a pressure operated change-over valve (DU-1). Depending on the layout, the pump can supply lubricant within a 50m radius at maximum pressure of 300bar.

Also used as a supply pump for progressive and single-line systems. For an alternative pump See Pump 215.

System Features

Reliable reservoir-type electric pump for high pressure systems with 1 or 2 pump elements. The pump is for medium lubricant requirements (reservoir size up to 30 l)


ZPU 08/14/24 Pump

Applications

Robust reservoir-type electric pump for high pressure systems – output 8, 14 or 24 l/hour. Primarily used as a supply pump in two-line systems

System Features

This pump has a higher delivery than the ZPU 01/02 and is therefore ideal for large systems with high lubricant requirements. Depending on the system layout, distances of 100 to 120 m are possible. The maximum operating pressure is 400 bar.


VS Two-line Metering Devices

Applications

High-quality metering devices in galvanised steel or stainless steel – designed for high pressure two-line systems. Naturally they can also be used low and medium pressure systems as well.

System Features

VS metering devices are available with up to 8 outlets and they incorporate the single-block design. Each outlet pair may be equipped with an indicator pin for visual monitoring. Additional optional features include rust proof material, rust and acid proof material, electrical monitoring, viton seals for high temperature applications, etc.


Change-Over-Valves

For Two-line and Single-line Systems

Lincoln change-over valves come in pressure controlled, pneumatically operated, electric motor operated or hydraulically operated versions. They are primarily designed for use in two-line or single-line systems (see Know-How).


VS Two-line Metering Devices

Applications

For Two-line Lubrication System

The new Lincoln magnetic indicator device is completely maintenance free and is suitable for extreme ambient conditions in the heavy industry. The device is resistant to temperature of up to 120°C as well as dust and steam penetration. As a result the device is ideal for application in continuous casters or rolling mills.

In conventional two-line metering devices the indicator pin seal has been the weak spot when the metering device is subjected to full operating pressures. However, with the magnetic indicator device, seals are not required. The movement of the indicator pin is conveyed without contact by the aid of a strong magnet to the outer control ring sleeve. The control ring is coated with a bright colour so that it is even visible in poorly lit conditions.

Should you require further information pertaining to any of these products contact us on tel. 021 4524661